Quality

Our mentality.

Quality assurance is always our priority, which is why our products and processes are standard-compliant and certified. We design in accordance with all standardized building codes.

Quality control

We have a quality control department that is independent of production. Before production begins, we determine which tests and inspections are required according to building standards and your requirements. Our quality control department performs inspections and partial tests during production. During the final acceptance of the tank, you are invited to attend the final inspections carried out by our quality control staff. We are equipped with all the necessary equipment to carry out various quality tests:

X-ray
Penetration testing
Visual inspection of welding
Drain test
Pressure test/full water test
Roughness measurement
Vacuum chamber testing
Thickness measurement

Certificates and standards

To guarantee quality, our products and services comply with the relevant certificates and standards:

ISO 9001:2015

To guarantee quality, our products and services comply with the relevant certificates and standards:

ISO 9001:2015

An environmental management system that regulates the impact of production on the environment.

DSTU ISO 45001:2018

An occupational health and safety management system that aims to reduce risks in the workplace.

DSTU B V.2.6-145:2010

Vertical welded steel tanks. General technical conditions.

DSTU B EN 1090-2:2018

Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures.

DSTU B V.2.5-96:2014

Engineering equipment of buildings and structures. Protective measures for tanks storing hazardous liquids.

DSTU-N B V.1.1-27:2010

Building climatology. Determines requirements for the design of structures taking into account climatic conditions.

DSTU EN 14015:2016

Manufacture of welded steel tanks for the storage of liquids at atmospheric pressure. General requirements.

EN 1090-2 EX3

European standard for steel and aluminum structures.

KIWA BRL-K756-03 and KIWA BRL-K21051-01

Certification for fuel storage tanks.

ATEX

A certificate can be important for an explosion-proof installation. We will be happy to advise you on this matter for a safe and ATEX approved installation.

Building codes and regulations

DBN V.2.2-28:2010

Buildings and structures. Tanks for the storage of oil and petroleum products. General requirements.

DBN V.1.2-14:2009

General principles of ensuring the reliability and structural safety of buildings and structures.

DBN V.1.2-14:2009/Amendment No. 1

Requirements for the resistance of tanks to the effects of dangerous natural phenomena and man-made accidents.

NAPB B.03.001-2004

Fire safety standards for oil, oil refining and petrochemical industry facilities.

DSTU B V.2.5-72:2014

Fire prevention measures when designing tanks for storing liquid hydrocarbons

KIWA BRL-K756-03

Requirements for tanks for storing liquid petroleum products.

KIWA BRL-K21051-01

Standards for storage and handling of chemicals.

Audits

We are happy to work with you if you would like to have additional tests and inspections carried out by a third party yourself. We invite you to audit our facilities so that you can personally see the quality of our products. In addition, we support you in carrying out ongoing periodic tests throughout the entire service life of your installations.

Permits and regulations

It is important that you make a list of requirements that your installation and tank must meet in advance. When issuing permits, the government may refer to various regulations and standards, such as (WHICH? List a few). Our experts are familiar with these regulations and can provide you with professional advice on obtaining a permit. In addition, if necessary, we can support you in negotiations with government authorities.

Get a project estimate

30 minutes after receiving the application, we will announce the price

Thank you!

We

Oops! Something went wrong while submitting the form.